HTV silicone adhesive  For Composite Polymer Silicon Rubber Electrical Insulator
HTV silicone adhesive  For Composite Polymer Silicon Rubber Electrical Insulator
HTV silicone adhesive  For Composite Polymer Silicon Rubber Electrical Insulator
HTV silicone adhesive  For Composite Polymer Silicon Rubber Electrical Insulator
HTV silicone adhesive  For Composite Polymer Silicon Rubber Electrical Insulator
HTV silicone adhesive  For Composite Polymer Silicon Rubber Electrical Insulator
HTV silicone adhesive  For Composite Polymer Silicon Rubber Electrical Insulator

HTV silicone adhesive For Composite Polymer Silicon Rubber Electrical Insulator

Model NO.:
CL-24S-2PA
Price:
USD 60.00-60.00 / kilogram
Delivery:
FOB
Minimum order quantity:
1 kilogram
Supply Ability:
10000 kilogram / Month
Country of Origin:
shenzhen
Quantity:
  • Place of Origin:CN
  • Classification:Other Adhesives
  • Main Raw Material:Silicone
  • Usage:Electrical Composite Insulator
  • Other Names:CL-24S-2D
  • Brand Name:KANGLIBANG
  • Model Number:CL-24S-2PA
  • Appearance:Shallow yellow liquid
  • Adhesion Strength:≥2MPa
  • Features:No powder hydrolysis
  • Storage:shelf life for 6 months
  • Package:1000ml/Bottle or 3kg/Bottle
  • Attention:Please cap its cover immediately after use to avoid volatilization.

 Silicone adhesive  CL-24S-2PA

CL-24S-2PA, Silicone primer is to bond peroxide-cure silicone rubber with substrates like metallics (Metal, Carbon steel, Stainless Steel)

 

application[1].png

 

Silicone Kitchen products 

 

Silicone car parts 

 

Silicone parts ,silicone wallets 

 

Features

1, Good adhesion

2, No powder hydrolysis

3, Temperature-tolerable  for Second-cure of  silicone rubber  

product%20specification[1].png

 
 
Appearance : Shallow yellow liquid
 
Adhesion Strength : ≥2MPa
 
Specifical Gravity : 0.75g/cm³
 

attention[1].png

  1, Please cap its cover immediately after use to avoid volatilization.                 
  2, Store the used and unused adhesive in separate way to lengthen the shelf life 
  3, After the primer coated on the substrates, leave it volatilize completely before entering the mold, otherwise, there will be bubbles in the finished products
 4, Wash clean the substrates to remove dirts or oil to avoid bad adhesion.
 5, Flush with water quickly once contacting with eyes accidently during use. 
    

our%20advantage[1].png

.png

Send Message

*
*

Send Message

*
*
Choose language