Silicone resin coating for silicone rubber surface coverings

• Classification:Chemical Auxiliary Agent
• Place of Origin:CN;GUA
• Usage:Coating Auxiliary Agents
• Usage:Plastic Auxiliary Agents
• Usage:Rubber Auxiliary Agents
• Type:Two part
• Usage:Other
• Other Names:Silicone soft oil
• Brand Name:Kanglibang
• Model Number:PT-0455-29
• Color:Translucent
• Packing:10KG/Barrel , 20KG/Barrel
• Product name:Soft Feel Oil PT-0455-29
• Application:Use to silicone rubber keypads, Photocopier,remote controllers.
• Keywords:Silicone rubber
• Storage:Stored at room temperature for 6 months with any mixing.
• Payment:T/T, PayPal, Western Union
• Classification:Chemical Auxiliary Agent
• Shelf Life:6 Months

Silicone Soft Touch Coating PT-0455-29

Soft Touch Coating to Silicone Rubber Surfaces.

The product is of two component and adopted by low temperature curing technique, It’s mainly used outside coating on the cured silicone rubber surfaces, cured at high temperature (190~220℃).Characterized by smooth feeling, friction resisting, dust proof, well covering strength and adhesion strength. The finished product is like silicone rubber keypads ,adult products , Photocopier , home appliance like remote controllers.

Typical Data

1. Engage the ready silicone rubber in second cure (190℃-200℃, 8-10minutes ), wash clean the surfaces   

2. Add 3% of platinum catalyst into the silicone resin for mixture and dilute with solvent(white gas) six times ,try small quantity first followed by mass input of the solvent when diluting the silicone resin.

3. Please filtrate with 300-400 mesh filter screen for twice before uploading in the spraying gun

4. Leave alone the ready silicone resin for 3-8minutes in the dust-free plant before the spraying process.

Baking method

Baking Condition(190-200℃) 8 – 10 min  

l The opened product should be mixed evenly, while processing the ink , the platinum catalyst should be added before diluting the ink .

l The spray should be done in a suitable environment ,better in dust-free plant , the temperature is controlled at 20-30℃, humidity at 55~75%.

l The silicone rubber should be forwarded to second cure above 150℃/10-30 minutes , otherwise will cause poor cure of the paints on the silicone rubber surfaces.

l The temperature is elevated slowly during the curing stage , Immediate baking after spraying process will result in poor shineness.

l The mixed silicone resin is to be consumed in 12 hours , sealed low temperature reservation can prolong the activation time .