Peroxide curing Agent silicone vulcanizing agent thermo plastic resin
Peroxide curing Agent silicone vulcanizing agent thermo plastic resin

Peroxide curing Agent silicone vulcanizing agent thermo plastic resin

Model NO.
C-16
Price:
USD 1.00-10.00 / ton
Delivery:
FOB
Minimum order quantity:
1 ton
Supply Ability:
100 ton / Month
Country of Origin:
Shenzhen
Quantity:
  • Classification:Catalyst
  • Place of Origin:CN;GUA
  • CAS No.:67763-03-5
  • Brand Name:KLB
  • EINECS No.:349900050
  • Purity:91.5%
  • Application:catalytic action
  • Other Names:DBPH
  • Model Number:C-16
  • MF:C16H34O4
  • Chemical name::2,5-Dimethyl-2,5-di(tert-butylperoxy)hexane
  • bp::55-57 °C7 mm Hg(lit.)
  • mp::6 °C
  • density::0.877 g/mL at 25 °C(lit.)
  • refractive index::n20/D 1.423(lit.)
  • Air & Water Reactions:Insoluble in water.
  • storage temp.::Indoors
  • Water Solubility::immiscible
  • General Description:Clear, yellow liquid. also for storage.
  • Chemical Properties:colourless to light yellow liquid

 

Peroxide Curing Agent silicone Vulcanizing agent 

C-15, C-16, C-16E

 

Silicone raw material should be cured at high temperature.The cured silicone are characterized non-toxi,no bad smell,and good anti-yellowing. Widely applied to high quality required and food grade silicone products. 

Note:This agent is an inflammable and volatile liquid, Please watch out during work time.

Component:
1. Anti-Yellowing Agent    2. peroxide    3. polysiloxane

Physical Properties (Tested by KE-951U Gel)
Appearance:                                            Transparent / Milk white /subtranslucent 
Specific Gravity(g/cm³)(23°C)                    0.9~1.0
Hardness(ShoreA)                                     49~51
Tensile Strength(Mpa):                              10~13
Elongation(%):                                            500~530
Cracking resistance(KN/m)                        24~27
Compression Set %(100°C/22h)                ≤5

Model

Curing Temperature

Application ratio

C-15

175°C

0.8-1.0%

C-16

180°C

1.5-2.5%

C-16E

130°C

1.0~1.2%

 

 

   
This agent must be add by many time with a small quantity. If not, fewer electrostatic spark and over heat from barrel will cause material burning during the mixing time, The fire can be put out by foam extinguisher.

Notes:
1. Avoid to contact with rust, heavy metal compound, metal salt, drying agent etc.
2. High vapour pressure agent easy to volatilize. Please sealed stored on free time.
3. The mixed silicone should be used up within 12 hours. If not, the curing time will be longer than before.
 
Storage and Shelf Life:
Keep in dark and ventilate place,away from light and fire.Storage for 6months below 25°C without open.
 
Packing:
    20KG/Bottle.

 

Vulcanizing agent DBPH

Chemical Properties
colourless to light yellow liquid
General Description
Clear, yellow liquid. also for storage and transport mixed with inert solid.
Air & Water Reactions
Insoluble in water.
Reactivity Profile
Peroxides, such as 2,5-DIMETHYL-2,5-DI-(TERT-BUTYLPEROXY)HEXANE, are good oxidizing agents. Organic compounds can ignite on contact with concentrated peroxides. Strongly reduced material such as sulfides, nitrides, and hydrides may react explosively with peroxides. There are few chemical classes that do not at least produce heat when mixed with peroxides. Many produce explosions or generate gases (toxic and nontoxic). Generally, dilute solutions of peroxides (<70%) are safe, but the presence of a catalyst (often a transition metal such as cobalt, iron, manganese, nickel, or vanadium) as an impurity may even then cause rapid decomposition, a buildup of heat, and even an explosion. Solutions of peroxides often become explosive when evaporated to dryness or near-dryness. Danger of explosion when dry. May explode from heat, shock, friction or contamination. May ignite combustibles (wood, paper, oil, clothing, etc.). May be ignited by heat, sparks or flames.
2,5-Dimethyl-2,5-di(tert-butylperoxy)hexane Preparation Products And Raw materials
Raw materials

 

 

>>>Applicationbar.jpg

 

39.jpg     

purse01.jpg
colors.jpgT069.jpg
T154.jpgcolorant.jpg

 

 

>>Certificatesbar.jpg

 

certificate.jpg

certificate.jpg

 

>>Why choose KANGLIBANG silicone adhesivebar.jpg

 

our company.jpg 

 

Customer Feedback:

 

Our factory supplies Silicone tackifier with high quality. I’ve been very happy with your best service, let’s continue discussions and work on more. 

 

Our enterprise mission is to strive to be a chinese national brand, to make the whole worle more harmonious, to make our life more colorful.  

 

Our Core Value

Integrity,Responsibility,

Passion,Win-win

Value ,Execution

 

 

 

Send Message

* clear input
*
customer-service Customer Service
message Message
go top Top
Scan the QR code Close
qr code
Scan the QR code Close
qr code
qrcode

Send Message

* clear input
*
Choose language