Appliction:for all types of silicone rubber to metal adhesion
Storage:To be kept out of the heat and sun.
Related categories:Adhesive,glue,bonding adhesive,vulcanizing agent,printing ink
Packing:As your requirement
Silicone with Metal adhesive
CL-26AB-24 is applied for bonding addition type and peroxide system silicone rubber with Metal ,PA , PET (Polyethylene terephthalate glycol ester)
1.Two component,single coating,easy processing.
2.The finished product withstand chemical test as Salt / Sustain oil / Folic-acid / water boiling
Color:Transparent Liquid or Gel
Component:A:Gel, B:Platinum Catalyst
Mixing Ratio:A:B=1:1(Use up within 4hours after mixture)
1, Surface Treatment:Chemical treatment with the substrate , remove oil and dust.
2, ApplyThe Glue:Mix A and B evenly then apply the primer on the substrates by brusing , dipping , spraying or screen printing
3, Surface Dry:Heat up with 110-130℃ for 10~15minutes.
4, Leavy Dry:The primer -coated substrates should be forwarded to moulding process with silicone right in the day and avoid pollution and contact with high temperature and humidity.
5, Curing:Join the silicone with primer coated substrates and forward to moulding process for hot air vulcanization
1,Keep in dry and shade place and avoid fire and heat
2,The solvent is volatile,please fasten down the cap after use
3, The steam issued by the solvent is harmful , the working shop should be fireproof and avoid long time inhalation and contact with skins
4,Lightly Cloudy won’t affect the performance.
5,While curing, the product should avoid contact with organic compound which contain substance like N, P ,S and heavy metallic anionic compounds like Sn,Pb,Hg,Sb,Bi,As and compounds which contains acetenyl Otherwise , the primer will result in bad cure , thus , test for the compatibility of primer with substrates is necessary
4 Months (20℃-25℃ avoid light ,heat and place in dry area)