- Classification:Chemical Auxiliary Agent
- Place of Origin:CN;GUA
- Usage:Electronics Chemicals
- Usage:Rubber Auxiliary Agents
- Type:liquid silicone
- CAS No.:CL-26AB-26
- Other Names:Silicone Primer
- EINECS No.:63148-62-9,9016-00-6
- Brand Name:KLB
- Model Number:CL-26AB-26
- Package:3KG/Barrel
- Type:Two Component
- Solvent:Component solvent
- Shelf life:Three months without cover opened.
- Appearance:Transparent or Pasty
- Drying condition:Baking at 110°C~130°C for 15~20 minutes
- Ratio:A:B=1:1
- Classification:Volatile Solvent Adhesives
- Usage:Other
Silicone Primer for LSR silicone with hardener machine
CL-26AB-26

Mainly appliedfor bondingHTV or LSR silicone rubber which is vulcanized by platinum coupling agent to PC ,PPSU
Double component, single coating, simple process.
Water resistance, anti-salt mist , chemicals resistance, anti-oils, solvent and resisting for severe rugged environment
Performance
Appearance:Transparent or Pasty
Component:A:Pasty fluid B:Platinum catalyst
Ratio:A:B=1:1
Solvent:Component solvent


1, Surface Treatment: The surface should be cleaned or degreased by chemical cleaning agent.
2, Coating Method: Firstly, Thoroughly mixed A and B, and then painting, dipping, spraying or printing.
3, Drying condition: Baking at 110°C~130°C for 15~20 minutes. 4, Temporary Storage:All the products which coated should be use within 24 hours, when storage ,it should be placed away from pollution and high temperature or wet air, they can be stored within 3 days. 5, Bonding Method: Silicone raw material gluing with other material should be molded at high temperature or hot air vulcanization.

Storage at a cool place and far away from heat and open flame.
Solvent is volatile, please cover the container tightly when it is done.
The workplace should be ventilated and avoid fire. Prevent breathing or contacting with the skin for a long time.
The mixed adhesive should be used up within 4 hours
If turbid state occurs , it does not affect the performance of the product
If In the curing process , the adhesive should be kept away from organic compound like N, P, S and heavy metal made ionic compound like Sn, Pb, Hg, Sb ,Bi , As , it should also avoid contact with Acetylene and other unsaturated base ,other wise , the adhesive will become hard to cure , thus , the compatibility of adhesive with substrates should be monitored before usage.

