KL-2680AB-50 ,Self adhesive liquid silicone serves as heat fast curing sprayable version liquid silicone coating which adheres to the glass and silicone rubber products surface sparing from the use of silicone primers on the glass and silicone rubber products substrates
1. Silicone glass nipple bottles
2. Silicone baby care products, silicone medical products
3. Silicone electronic products
1, Strong adhesion to glass/silicone surface
2, Self adhesive
3, Shore hardness 50 degrees
Appearance and component : KL-2680A Gel with platinum catalysts
1, The user should make changes based on spraying thickness and weather conditions (Temperature ,humidity).
2,The solvent is suppose to be blended solvent. xylol :Ethyl acetate:Cyclohexanone=80:15:5 or Tolune : Butanone =1: 1. too much water in the solvent will cause rough surfaces of liquid silicone coating. 3,The-ready-to-bond glass substrates should be washed clean till no dusts and oil dirts.
4 ,Check during spraying coating process , control the viscosity of the liquid silicone, make sure enough coating amount and get it cured completedly.
5,The spraying environment counts , It is advisable to adopt dust-free plant for production .Temperature controlled at 25~35℃. Humidity controlled at 25~50%.
6, The mixed liquid silicone must be used up in 6 hours , stop use the material when found viscosity increase or material get hardened