Self bondable LSR to PC and PET
Self bondable LSR to PC and PET
Self bondable LSR to PC and PET
Self bondable LSR to PC and PET
Self bondable LSR to PC and PET
Self bondable LSR to PC and PET

Self bondable LSR to PC and PET

Model NO.:
USD 17.90-17.90 / pairs
Minimum order quantity:
20 pairs
Supply Ability:
10000 pairs / Month
Country of Origin:
  • Place of Origin:CN;GUA
  • Classification:Other Adhesives
  • Model Number:KL-F6050AB
  • Brand Name:kanglibang
  • Type:Two Component
  • Usage:Fiber & Garment
  • Usage:Footwear & Leather
  • Usage:Packing
  • Main Raw Material:Silicone
  • Usage:Other
  • Appearance:A : Transparent gel B: Milky white gel
  • Viscosity(mPa.s) GB-T 11409.8-1989:A : 5300000 B:6000000
  • Shore Hardness (A):50±2
  • Tensile Strength(Mpa):≥7.0
  • Tear strength(kN/m):≥25
  • Elongation at break(%):≥500
  • Curing condition:TC10: 120℃*40S-TC90:120℃*90S
  • Specifical gravity(g/cm3):1.10±0.02


KL-F6050AB,Self adhesive LSR , is addition type LSR , It has strong bond to thermoplastics

like polycarbonate and does not stick to the mold featuring with fast curing speed . 

1.png                         17.png


 Wireless chargers ,silicone precision electronic                 Silicone cell phone cases


                             Silicone medical products                                           Baby products                


product advantage.jpg

1,Spare from use of base primer , bond to different substrates

2,Easily pigmentabel

3,Releasable from the metal mold

4,Short curing time

5,Suitable for silicone overmolding products , insert molding or double injection molding ,

      partly needing bond and sophisticated precision parts.

6,Maximise the productivity and reduce labour costs

7,The finished product ok rate is highest



product specification..jpg







1, The tool used to take A and B should not be the same to avoid partial lumps.           

2, The mixed A and B are reserved for three days, The higher the temperature , the shorter the reservation  time.                                                      

3, The LSR should be avoided contact with N,S,P and Sn, otherwise , it will cause curing failure or insufficent curing.                                                  

4,  The ideal mixing ratio would be 1:1,over inbalance of the mixing ratio will affect the properties of the made silicone products        



our advantage.webp.jpg

Service-67130 (1).jpg