Pressure Sensitive Silicone Adhesive For 100% Medical Grade Silicone

• Classification:Chemical Auxiliary Agent
• Place of Origin:CN;GUA
• Usage:Rubber Auxiliary Agents
• Other Names:self bonding silicone glue
• Type:Two components
• Brand Name:KLB
• Model Number:KL-6635AB
• Application:Cloth bra, silicone bra, Medical adhesive tape, Medical scar patch
• Appearance:transparent colloid
• Type:Silicone adhesive
• Curing Condition:80 ℃ procuring for 5 minutes, then 120 ℃ curing for 10 minutes
• Specific Gravity:0.98
• Storage:Shelf life for 6 months, stored below 25℃ without mixing
• Packaging:20KG/50KG/180KG/Barrel
• Viscosity (25℃ 60%):20000-50000mpa.s

Pressure Sensitive Silicone Adhesive For 100% Medical Grade Silicone

KL - 6635AB

Heating curing,two components, addition type pressure sensitive silicone adhesive.

1, Close to skin feeling

2, Persistent pressure sensitive performance 3, Easy clean

Cloth bra, silicone bra

Medical adhesive tape

Medical scar patch

1, The operation time of mixture silicone adhesive is 40 minutes under standard conditions. 2, Do not contact with the N/P/S/As/Pb/Sn and Bi etc. element. Otherwise, it will cause bad curing of silicone adhesive. 3, If to coat the silicone adhesive on the TPU film/silicone substrates/non-woven fabrics, we should use the primer P-46AB, the P-46AB treated substrates is baked to dry at 90℃ for 60 seconds.

1, Weigh: Based on the weight ratio A:B=1:1 by using electronic scale to determine the adhesive weight. 2, Mixing: Using clean stir tool to stir,scrape,then stir evenly.

3, High temperature curing : Baking the adhesive at 120℃ for 10 minutes in oven to cure, then take out and cool it down.

4, Test finished products: Test viscosity by hand touch,qualified product is covered with release soft thin film to avoid dust.