C-100A and C-100B belongs to platinum addition type cross linking agent and can be approved by FDA after cured, also characterized by non-toxic, odourless, high transparent and well anti-yellowing.The materials can be cured again if low-molecular -weight is strict by request.
This agent are mainly applied to Food Grade and Medical Grade silicone products, such as silicone nipples, cake mold, silicone cookwares, medical silicone parts like tube and so on, also can be used for extrusion products and mobile phone keypad.
High quality widely used in most industries.
Method of Application:
Application Ratio is Adjustable.
Suit for most application.
Type one: Extrusion or Injection Process
1. For High Tensile Silicone Materials(filled with gaseous phase white carbon black)
2. For Normal Silicone Material
Type two: Molding Process
Peroxide Vulcanizing Agent
Single ComponentModel: C-15; C-16; C-16E
Physical Properties (Tested by KE-951U Gel)
Appearance:Transparent / Milk white /subtranslucent
Specific Gravity(g/cm³)(23°C) 0.9~1.0
Tensile Strength(Mpa): 10~13
Cracking resistance(KN/m) 24~27
Compression Set %(100°C/22h) ≤5
This agent must be add by many time with a small quantity. If not, fewer electrostatic spark and over heat from barrel will cause material burning during the mixing time, The fire can be put out by foam extinguisher.