HTV Silicone rubber bonding with nylone silicone products
Applied as adhesion promoter for Un-vulcanized peroxide system Silicone rubber and fluorinated silicone rubber bonding with PA, fibre glass ,metal,epoxy,ceramic, steel, copper, plastic, Nylon with PC , it works preferably well for silicone Kitchen products ,Silicone rubber insulators etc.
Silicone PA overmolding
1,No bubblesin finished silicone products
Bonding Strength over 2 Mpa.
2,One component,single coating, easy process.
3,Good bonding for silicone products that requirespost-cure
4,CL-24C-3 lives with a severe rugged environment resist water,salt,chemicals, oil and solvent.
Break down Voltage(Attach 4mm Silicone sleeve)
1, Treat the substrates with blast sanding ,polishing or wash with industrial alcohol.
2, Brushing ,painting ,dipping or spraying the CL-24S-2D on the substrates.
3, Leave dry in room temp for 30 minutes or baking at 110-130℃ for 5-15mintes.
4, The primer treated substrates are processed within that day.
5, The first cure is suitable to DBPH system silicone rubber and the second cure the temperature maximum at 200℃
1, Please cap its cover immediately after use to avoid volatilization.
2, Store the used and unused adhesive in separate way to lengthen the shelf life.
3, After the primer coated on the substrates , leave it volatilize completely before entering the mold, otherwise , there will be bubbles in the finished products.
4, Wash clean the substrates to remove dirts or oil to avoid bad adhesion.
5, Flush with water quickly once contacting with eyes accidently during use
Keep the product sealed and stored at 20℃-25℃ away from light and heat ,shelf life for 3 months