Feature:Water resistance and high temperature resistance
Load Port:Shenzhen, China
liquid silicone adhesive for silicone electrical products and kitchenwares
CL-24C-3,Silicone primer to bond peroxide-cure silicone rubber with substrates like fibre glass ,thermoplastics ,electrical products etc.
CL-24C-3, which is applied for silicone primer for uncured silicone rubber and fluorinated silicone rubber to epoxy preferably, also the bakelite and metal, carbon stainless, aluminum, copper, Zn plating and nickle plating materials with excellent adhesion after curing.
Good Adhesion Strength
Making your silicone products 99% ok
3 Times Standard Tests before goods release
No adhesion failure.
Appearance: Shallow yellow liquid
Adhesion Strength: ≥2MPa
Specifical Gravity: 0.75g/cm³
1, Treat the substrates with blast sanding, polishing or wash with industrial alcohol.
2, Brushing, painting, dipping or spraying the CL-24 on the substrates.
3, Leave dry in room temp for 30 minutes or baking at 110-130℃ for 5-15mintes.
4, The primer treated substrates are processed within that day.
5, The first cure is suitable to DBPH system silicone rubber and the second cure the temperature maximum at 200℃.
1, Please cap its cover immediately after use to avoid volatilization.
2, Store the used and unused adhesive in separate way to lengthen the shelf life.
3, After the primer coated on the substrates, leave it volatilize completely before entering the mold, otherwise, there will be bubbles in the finished products.
4, Wash clean the substrates to remove dirts or oil to avoid bad adhesion.
5, Flush with water quickly once contacting with eyes accidently during use
Keep the product sealed and stored at 20℃-25℃ away from light and heat, shelf life for 6 months.