CL-26AB-24 is mainly applied for bonding both platinum base and peroxide base silicone overmolding ,PA , PBT , PET (Polyethylene terephthalate glycol ester),PBT etc in compression and injection molding which result in a tight bond after the curing process.
No partial bonding failure.
No primer traces after the silicone products is made
High Tear Strength
The Silicone rubber is damaged when tearing from PA(Nylon)
LSR Silicone overmolding PA
Adhesion Strength is over 2Mpa, No bonding failure
ISO9001 , SGS certified
Labour costs saving
Easy processing, Can dip dry ,
No corrosion to PA(nylon)
Color :Transparent Liquid or Gel
Component:A:Gel , B:Platinum Catalyst
Mixing Ratio:A:B=1:1(Use up within 4hours after mixture)
1,Keep in dry and shade place and avoid fire and heat
2,The solvent is volatile,please fasten down the cap after use.
3, The steam issued by the solvent is harmful , the working shop should be fireproof and avoid long time inhalation and contact with skins
4,Lightly Cloudy won’t affect the performance.
5,While curing, the product should avoid contact with organic compound which contain substance like N, P ,S and heavy metallic anionic compounds like Sn,Pb,Hg,Sb,Bi,As and compounds which contains acetenyl Otherwise , the primer will result in bad cure , thus , test for the compatibility of primer with substrates is necessary