High temperature Vulcanization Cyanoacrylate adhesive for silicone rubber
High temperature Vulcanization Cyanoacrylate adhesive for silicone rubber
High temperature Vulcanization Cyanoacrylate adhesive for silicone rubber

High temperature Vulcanization Cyanoacrylate adhesive for silicone rubber

Model NO.:
USD 53.00-60.00 / tons
Minimum order quantity:
3 tons
Supply Ability:
100.0 tons / Month
Country of Origin:
  • English name:silicone adhesive
  • Chemical property:Colorless Transparent Liquid
  • Operating temperature:Room temperature
  • Appliction:Used for silicone glue to metal, plastic,rubber...
  • Storage:To be kept out of the heat and sun.
  • Features:Rapid solidification
  • Drying time:Drying at room tempreture for 5 minutes
  • Related categories:Adhesive,glue,bonding adhesive
  • Viscosity:Excellent viscosity
  • Packing:20g/bottle or 500g/bottle
  • Classification:Hot Melt Adhesives
  • Main Raw Material:Silicone
  • Usage:Construction
  • Usage:Fiber & Garment
  • Usage:Footwear & Leather
  • Usage:Packing
  • Usage:Transportation
  • Usage:Woodworking
  • Usage:suit for silicone sitck with metal
  • Place of Origin:CN;GUA
  • CAS No.:7085-85-0
  • Other Names:silicone adhesive
  • MF:C5H5NO2
  • EINECS No.:203-080-7
  • Brand Name:KLB
  • Model Number:KL-301G
  • Type:Room Temperature

High temperature Vulcanization Cyanoacrylate adhesive for silicone rubber 



KL-301G(ABC), three component adhesive swiftly cured to be silicone rubber at high temperature condition. Elastic and tight bond performance between cured type of silicone rubbers. The adhesive is characterized with good flowing ability before curing and elasticity electrical insulation property after cured.



Applied to silicone bonding with silicone like silicone rubber ring gaskets or seals which results in waterproof, heat resistance, insulation proof, moisture proof, shock absorbtion and sealing&bonding purpose.


silicone gaskets sealant.png 


Physical Properties.png 

Before curing

Mix viscosity(25℃),mΡa.s:             1000

Specific Gravity(g/cm³):                 1.10

Operable time(25℃),h:                  7.0

Curing time(170℃),min.:              1-2min


After curing

Tensile strength(Mpa):                  7.0

Hardness(Shores A):                   55±5

Elongation(%):                         450

Adhesive property:             ≥2.0(A1-A1,cohesive failure )

Volume resistance(Ω • cm):             1×1014

Dielectric strength(KV/mm):              20



Application ratio: A:B:C=10:10:1(weight ratio)

The adhesive is added by weight ratio and requires thorough mixture.

Preheat the silicone rubber bonding areas a while before applying on the mixed adhesives KL-301G(ABC).

Heating at temperature 180°C for 15-30 Seconds.



Keep in tight seal packings

Curing time of KL-301G(ABC) concerns with heat transfer efficiency and its packing sizes under the certain temperature.

It also works for bonding cured type silicone rubber with a primer-treated metals (CL-24S-3 primer as base Coating)

Testing compability of rubber and base material before using. Because the compound which contained sulfur, tin,arsenic,phosphorus,nitrogen,PB will cause bad curing during the curing process.






Shelf life for 4 months, stored at 20℃-25℃ dry place, away from light and hot.


Bonding machine


 silicone bonding machines.jpg