- Place of Origin:CN;GUA
- Brand Name:Kanglibang
- Model Number:3250
- Appearance:transparent
- Operating time ( hours ):0.5
- Curing time( hours ):6
- Hardness (A°):25
- Density ( g/cm 3 ):1.08
- Viscosity (CS):29000
- Tensile-strength ( kgf /cm2 ):40
- Elongation-break(%):520
- Retractility(%):≤0.3
high quality liquid silicone rubber for toy
Silicon rubber for making various molds,such as reproduction of concrete or cement , poly resin,
epoxy, polyurethanepolymer, plaster, gypsum, soaps, candle & lighting, architecture, decorative
arts and crafts, plastic toy, gift and stationery, big statue, cultural relic product, etc..
Features:
1. Two-part silicon rubber:flowable liquid silicon and curing agent.
2.Cures at room temperature within 2-4 hours.
3. An exceptional fluidity and good operability.
4.Temperature and deformation resistance as well as low shrinkage.
5.High duplication times.
Users Instruction:
RTV—TWO molding silicone rubber (silicon) and silicon are generally named as two-part room temperature sulfurated silicone rubber, which features an exceptional fluidity
andgood operability.When mixed with 2~3% curing agent, they can still be operated
within 30 minutes,but will be formed after 2-3 hoursWith resistance to deformation, high temperature, acid and alkali, and expansion, silicon flexible molds are used for mold duplication and delicate mold making for poli crafts, resin crafts lighting and candle crafts.
This product is a white or red flowable liquid with a hardness of 22~50A° when cured. If large
products and therefore multiplepiece molds are needed by customers, silicone rubber with higher hardness will be required for the molds. Conversely, soft silicon is indispensable for molds with complicated pattern and delicate details. The amount of curing agent admixture depends on the actual need of customers. More will be added for speedy drying and fast release and less when otherwise.
(Note:we do not recommend silicon oil. For special soft mold or molds with complex pattern or fine details, 5%~10% silicon oils can be added to condition the flexibility of the mold for convenience of release)
Application


About Our Company


