Warranty:4Months at room temperature without open.
security level:Food and medical grade
Platium Curing Agent
Good for both compression molding and extrusion forming.This agent are mainly applied to Food Grade and Medical Grade products, such asbaby nipples, cake mold, silicone cookwares,extrusion gaskets ,ice mold, table matt, medical silicone tube and so on
C-100A& B,two component platinum addition type cross linking agent which is added in the raw silicones for the cross linking of food and medical grade silicone rubber items ,The vulcanized products can pass the FDAtest,it features with non-toxic, odourless, high grade oftransparency,well anti-yellowing and other properties.
Type one: Extrusion Or Injection Moulding
1.For High Tear Strength Silicone Materials(filled with gaseous phasewhite carbon black)
First curing: IR(Infrared Radiation) curing at 190~200℃for40~60seconds.
Finished curing:After first curing, it should be cured again as below conditions.
Type two: CompressionMolding
Curing temperature: 115~135℃(200~300seconds)
Curing time:Can be adjusted with the thickness and type of the silicone products
1.The raw material is easy poisoningonce contact with nitrogen, phosphorus, sulfur and heavy metal materials.
2.Part A and Part B can not be added at the same time , addition of Part B comes first ,followed by part A after full incorporation of part B into raw silicones , the order is important, A and B can not be mixed together.
3. The temperature of mixing machine which used for mixing silicone with platinum curing agent can not be higher than 45℃.Please add this agent after being cold.
4.The mixed rawmaterialsshould be used up within two days.
5.Please choose the suitable raw materials for hot air vulcanization,unmatched raw material will cause bubbles in the process.