Storage:4 months.(To be kept out of the heat and sun at 20℃-25℃)
Packing:1KG/bottle or 20g/bottle
Cyanoacrylate adhesive for bonding silicone rubber
490 is a kind of a single component instant adhesives. Which is Applied to silicone rubber withmetallics and all kinds of plastic materialsuch as ABS, PC, TPU etc. Matched with primer (K770) can be used for silicone keypad and P+R product. The adhesives are characterized by high shearing strength and fast curing after pressing.Matched with primer (K770) can be used for silicone keypad and P+R products.
Tear to break silicone rubber
Glue amount drops to 75%, Bonding effect 30% higher
Stable bonding, easy process.
2 minute of quick bonding
Colorless clear liquid(Density can be adjusted)
Main Raw Material:
≤45S(Density can be adjusted)
High viscosity, non-yellowing, low whity and the bonding surface easy to control.
Apply to soft silicone rubber,ABS resin, metal, plastic and so on.
Shelf Life : 6 months.
1, Wash the substrates with alchol or tolune ,rub against with sand paper if necessary
2, Brush the K-770 on the bonding silicone rubber surfaces ,leave alone for less than 5minutes
3, Apply the adhesive as appropriately on the bonding surface,then done with pressing for a few seconds.
Keep in dry and shade place and avoid fire and heat